User’s Manual of WGS Managed Series
1.4 Product Features
Physical Port
■ 10/100/1000BASE-T Gigabit RJ45 copper
■ 100/1000BASE-X mini-GBIC/SFP slots
Power over Ethernet (WGS PoE managed series)
■ Complies with IEEE 802.3at High Power over Ethernet End-span PSE
■ Complies with IEEE 802.3af Power over Ethernet End-span PSE
■ IEEE 802.3af/802.3at devices powered
■ Supports PoE Power up to 36 watts for each PoE port
■ Auto detects powered device (PD)
■ Circuit protection prevents power interference between ports
■ Remote power feeding up to 100 meters
■ PoE Management
− Total PoE power budget control
− Per port PoE function enable/disable
− PoE Port Power feeding priority
− Per PoE port power limitation
− PD classification detection
− PD alive check
− PoE schedule
Layer 2 Features
■ Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause frame flow control (full-duplex)
■ High performance Store and Forward architecture, broadcast storm control, runt/CRC filtering eliminates erroneous
packets to optimize the network bandwidth
■ Supports VLAN
- IEEE 802.1Q tagged VLAN
- Provider Bridging (VLAN Q-in-Q) support (IEEE 802.1ad)
- Protocol VLAN
- Voice VLAN
- Private VLAN
- Management VLAN
- GVRP
■ Supports Spanning Tree Protocol
- STP (Spanning Tree Protocol)
- RSTP (Rapid Spanning Tree Protocol)
- MSTP (Multiple Spanning Tree Protocol)
- STP BPDU Guard, BPDU Filtering and BPDU Forwarding
■ Supports Link Aggregation
− IEEE 802.3ad Link Aggregation Control Protocol (LACP)
− Cisco ether-channel (static trunk)
■ Provides port mirroring (many-to-1)
■ Loop protection to avoid broadcast loops