Quick Installation Guide
- 27 - PLANET Technology Corp.2024
Figure 6-4: IP Information Screen
▓ Configuration of the IP Address
3. At the “#” prompt, enter the following command and press <Enter>
as shown in Figure 6-3.
WGS‐4215‐16P2S#configure
WGS‐4215‐16P2S(config)#ipaddress192.168.1.100mask255.255.255.0
WGS‐4215‐16P2S(config)#ipdefaultgateway192.168.1.254
The previous command would apply the following settings for the
Wall-mount Managed Switch.
IP Address: 192.168.1.100
Subnet Mask: 255.255.255.0
Gateway: 192.168.1.254
Figure 6-5: Configuring IP Address Screen
4.
Repeat step 1 to check if the IP address has changed.