Quick Installation Guide
- 28 - PLANET Technology Corp.2024
6.2 Storing the Current Switch Configuration
At the “#” prompt, enter the following command and press
<Enter>.
# copy running-config startup-config
Figure 6-6: Saving Current Configuration Command Screen
If the IP is successfully configured, the Wall-mount Managed Switch will
apply the new IP address setting immediately. You can access the Web
interface of the Wall-mount Managed Switch through the new IP address.
If you are not familiar with the Telnet command or the related
parameter, enter “?” anytime in console to get the help
description.
To Next Page
Loading...
Need help?
General