Quick Installation Guide
- 29 - PLANET Technology Corp.2024
7. Recovering Back to Default Configuration
IP Address has been changed or admin password has
been forgotten –
To reset the IP address to the default IP address “192.168.0.100” or reset
the login password to default value, press the reset button on the front
panel for about 5 seconds. After the device is rebooted, you can log in the
Web interface management within the same subnet of 192.168.0.xx.
Figure 7-1: WGS-804HPT/WGS-4215-8T Reset Button
Figure 7-2:
WGS-4215-8T2S/WGS-4215-8P2S Reset Button
Figure 7-3:
WGS-4215-16P2S Reset Button