Planet WGSW-20160HP Quick Installation Guide

9
ThepreviouscommandwouldapplythefollowingsettingsfortheManagedSwitch.
IPAddress:192.168.1.100
SubnetMask:255.255.255.0
4. Repeatstep1tocheckiftheIPaddresshaschanged.
If the IP is successfully congured, the Managed Switch will apply the new IP
address setting immediately. You can access the Web interface of the Managed
SwitchthroughthenewIPaddress.
3.3 StoringCurrentSwitchConguration
In the Managed Switch, the running conguration sequence running-cong can
be saved from the RAM to FLASH by “copy” command, so that the running
conguration sequence becomes the start-up conguration le, which is called
congurationsave.
Atthe“#”prompt,enterthefollowingcommandandpress<Enter>.
# copy running-cong startup-cong
Figure 3-8: Saving Current Conguration Command Screen
If you are not familiar with the console command or the related param-
eter,enter“help”anytimeinconsoletogetthehelpdescription.

Planet WGSW-20160HP Specifications

General

Brand	Planet
Model	WGSW-20160HP
Category	Switch
Language	English