PlanetCNC THC - Features and Specifications

To Next Page

To Previous Page

Introduction

1.2 Features and specifications:

Torch height sensor device:

• Plasma arc voltage measurement up to 350 V

• Additional input for divided plasma voltage (1:50) up to 10 V

• Plasma voltage present signalization

• Full optical output isolation; transmitter and receiver connected over an optical fiber

cable

• Main AC power supply (110 VAC-230 VAC/50-60 Hz)

Torch height controller:

• Output signals: Arc Ok, Up and Down (normally-open solid-state relay outputs)

• Programmable reference and hysteresis voltage, delay time and anti-dive limit voltage

• Current plasma voltage presentation on LED display

• LED signalization of arc present, up and down signals

• Full optical input isolation; transmitter and receiver connected over an optical cable

• Test mode operation

• Wide power supply voltage range (6 - 36 V)