Planika Pure Flame - User Manual

Questions and Answers

J
jasmine46Aug 16, 2025
What to do if my Planika Pure Flame runs out of fuel?
- J
  Jessica SilvaAug 16, 2025
  If your Planika Indoor Fireplace runs out of fuel, the device is being cooled. Wait for the red diode to turn off, then refill the tank.
J
Julie GarnerAug 22, 2025
What to do if there's an error during flame ignition in my Planika Indoor Fireplace?
- E
  ewashingtonAug 22, 2025
  If an error occurs during flame ignition with your Planika Indoor Fireplace, press and hold the ECO button on the control panel for 10 seconds.
V
vleeAug 25, 2025
What to do if my Planika Indoor Fireplace has an internal fuel spill?
- J
  julia73Aug 25, 2025
  If an internal fuel spill occurs in your Planika Indoor Fireplace, disconnect the pump. Wipe any visible liquid and wait for at least one hour. Then, press and hold the ECO button on the control panel for 10 seconds. If the error continues, wait for at least 24 hours.
A
Andrea CampbellAug 27, 2025
What to do if my Planika Pure Flame indicates the room temperature is too low?
- P
  pachecostephanieAug 28, 2025
  If your Planika Indoor Fireplace indicates that the room temperature is too low (below 10°C) or if there is a device error, increase the room temperature. Then, press and hold the ECO button on the control panel for 10 seconds and wait for the green diode.
G
garmstrongAug 30, 2025
What to do if the Planika Pure Flame Indoor Fireplace shows an error or the ambient temperature is too low?
- V
  Valerie AdamsAug 30, 2025
  If the ambient temperature is too low (below 10°C) or you're experiencing a device error with your Planika Indoor Fireplace, first warm up the room. Then, press the ECO button for 10 seconds and wait for the green diode to appear.
B
Brandon EvansSep 2, 2025
How to fix a Planika Indoor Fireplace device error?
- N
  Natalie GarrettSep 2, 2025
  To resolve a device error on your Planika Indoor Fireplace, press the ECO button for 10 seconds.
C
cookstevenSep 4, 2025
What to do if Planika Pure Flame Indoor Fireplace is cold?
- J
  Jimmy BakerSep 5, 2025
  If the Planika Indoor Fireplace is cold, wait for the green diode to appear.
F
Francisco LynchSep 7, 2025
What to do if my Planika Burner shows a device error?
- H
  Hannah ReedSep 7, 2025
  If your Planika Burner is showing a device error, try pressing and holding the ECO button for 10 seconds. This may resolve the error.
R
robert09Sep 10, 2025
What to do if my Planika Pure Flame Indoor Fireplace shows a device error?
- V
  vburtonSep 12, 2025
  If your Planika Indoor Fireplace is showing a device error, press and hold the ECO button on the control panel for 10 seconds.
A
Ashley HallSep 12, 2025
What to do if the Planika Burner runs out of fuel while operating?
- N
  Nicole CampbellSep 12, 2025
  If the Planika Burner runs out of fuel during operation, wait for the red diode to turn off before refilling the tank.