6
STEP 1
SETUP
The S10 Telephone Headset System is designed for use with an
existing telephone.
Turn the S10 base over and insert the Headset Holder .
Remove the handset cord from your telephone and plug it into the
S10 Handset Jack .
Using the Short Cord , connect the S10 Telephone Line Jack
to your telephone handset jack.
Connect the AC Power Adapter to the S10 AC Power Adapter
Jack and a wall outlet.
Plug the Headset Cord into the Headset Jack .
Put on Headset. Press the Headset/Handset Switch and pickup
the Handset (Headset Indicator Light on) . Slide the
Configuration Switch until you hear a clear dial tone through the
Headset. Trying other settings will not harm the amplifier or your
telephone.
To Next Page
Loading...
