Plantronics Savi W710 User Manual

Savi
®
W710
Multi Device Wireless
Headset System
Guide de démarrage rapide
Guía de inicio rápido
Guia de Início Rápido
QUICK START GUIDE
VIDEO GUIDE
http://docs.plantronics.com/savi-700
1
Decrease volume Short press –
2
Answer/end call Short press
3
Mute Short press
4
Increase volume Short press +
5
Flash While on call, long press volume up + or volume down –
for 1.5 seconds, will put call on hold and answer another.
CAUTION For your safety, do not use headset at high volumes
for extended periods of time. Doing so can cause hearing loss.
Always listen at moderate levels. For more information on
headsets and hearing visit plantronics.com/healthandsafety.
Please refer to the separate safety instructions for important product
safety information prior to installation or use of the product.
Savi W710/W720 has a WO2 base and a WH300/WH350
headset.
1
Headset
Customize and Charge
1
Attach charge cradle to base.
2
Plug one end of power supply into power jack on back of the base and
other end into working power outlet.
3
To charge, dock headset in base, minimum of 20 minutes.
2
Desk Phone
Connect and Call
1 Choose desk phone setup A, B, or C and connect cables.
A Desk phone (standard)
USE
B Desk phone + HL10 lifter (sold separately)
See user guide at plantronics.com/accessories
USE
C Desk phone + EHS cable (sold separately)
See user guide at plantronics.com/accessories
USE
2
While wearing headset, short press base desk phone button.
NOTE If you don't have remote call control through a lifter (HL10) or cable
(EHS), manually remove desk phone handset before each call.
3
If you do not hear a dial tone, open side panel and adjust middle
configuration switch (A–G) until you do. Default setting A works for
majority of desk phones.
4
Dial test call from desk phone.
5
End call by pressing headset call control button.
3
Mobile
Connect and Call
1
Press down and hold Bluetooth pairing button (4 seconds) on Savi
base until indicator LED flashes red and blue.
2 Place Bluetooth mobile phone into search mode. Select SAVI 7xx from
the list of found devices.
3 If prompted by mobile phone, type 0000 as passcode.
Bluetooth indicator LED on base will turn solid blue when base has an
active connection with mobile phone.
4
While wearing headset, short press base mobile button.
5
Dial test call from mobile phone.
6
End call by pressing headset call control button.
4
Computer
Connect and Call
1
Connect USB cable.
2
Load Plantronics software by visiting plantronics.com/software and
click on download button.
3
While wearing headset, short press base computer button.
4
Dial test call from computer softphone.
5
End call by pressing headset call control button.
NEED MORE HELP?
Product support
plantronics.com/support
Online user guide
http://docs.plantronics.com/savi-700
Savi W710/W720 has a WO2 base and a WH300/WH350
headset. 86106-01 (04.11)
Guía de inicio rápido
Guide de démarrage rapide
QUICK START GUIDE
Savi
®
W710
Savi
®
W720
Multi-Device Wireless
Headset System
VIDEO GUIDE
http://docs.plantronics.com/savi-700
NEED MORE HELP?
Technical support
plantronics.com/support
Online user guide
http://docs.plantronics.com/savi-700
plantronics.com/software

Plantronics Savi W710 Specifications

General

Headset type	Monaural
Product type	Headset
Product color	Black
Wearing style	Head-band
Volume control	Digital
DECT connectable	Yes
Recommended usage	Office/Call center
Impedance	- Ω
Magnet type	-
Ear coupling	Circumaural
Headphone frequency	- Hz
Headphone sensitivity	- dB
Microphone type	Boom
Connectivity technology	Wireless

Summary

Headset Customize and Charge

Attach Charge Cradle to Base

Attach the charge cradle to the base for headset charging.

Connect Power Supply

Connect the power supply to the base and a power outlet.

Charge Headset

Dock headset in base for minimum 20 minutes charging.

Headset Controls

Details headset buttons for volume, call control, mute, and flash.

Hearing Safety Warning

Warning about high volume use and potential hearing loss.

Desk Phone Connect and Call

Choose Desk Phone Setup

Select setup A, B, or C and connect the appropriate cables.

Desk Phone Configuration Note

Adjust middle configuration switch if no dial tone is heard.

Test Call from Desk Phone

Dial a test call from the desk phone.

End Call

End the call by pressing the headset call control button.

Mobile Connect and Call

Initiate Bluetooth Pairing

Press and hold base Bluetooth pairing button until LED flashes red/blue.

Pair Mobile Phone

Search for SAVI 7xx on mobile phone and select it.

Enter Passcode

If prompted, type 0000 as the passcode for the mobile phone.

Confirm Connection

Base LED turns solid blue upon active connection with mobile phone.

Test Call from Mobile Phone

Dial a test call from the mobile phone.

End Mobile Call

End the call by pressing the headset call control button.

Computer Connect and Call

Connect USB Cable

Connect the USB cable to the computer.

Install Plantronics Software

Visit plantronics.com/software and download the software.

Activate Computer Connection

While wearing headset, short press base computer button.

Test Call from Computer

Dial a test call from the computer softphone.

End Computer Call

End the call by pressing the headset call control button.