USER PRECAUTIONS
• Remove all loose clothing, neckties, rings, bracelets
and other jewellery that may get caught in moving parts.
• Non-slip footwear is recommended.
• Wear protective hair covering to contain long hair.
• Ear muffs and gloves are recommended
• Always use safety glasses. NB: Everyday eye glasses
do not contain impact resistant lenses - they are NOT
safety glasses.
• Always use face or dust masks if grinding operation is
dusty.
• When using electrical tools, basic safety precautions should always be used including the following:
• Unplug from outlet when not in use, before putting on or taking off any parts and before cleaning.
• To protect against electrical shock, do not immerse cord, plug or appliance in water or any other liquid.
• To reduce the risk of unintentional starting, make sure that the switch is in the off position before plugging in.
• Do not operate any product with a damaged cord or plug, if the product malfunctions or it is dropped or damaged in any
way.
• Always check for damaged parts before operation. Damaged parts should be properly repaired and replaced.
• Do not use in dangerous environments or expose to damp or wet conditions.
• Keep your working area well lit.
• Do not let the cord hang over the edge of table or counter or touch hot surfaces.
• Do not use product or attachments for other than intended purpose.
• Do not leave the grinding wheel unattended whilst it is operating.
• Keep all non-users a safe distance from the work area. Keep out of reach of children at all times.
• Grinding generates sparks - keep away from all flammable substances and materials.
• Never touch the moving grinding wheel.
• The motor is specially rated for intermittent use- maximum 20 minutes continuous use.
• Do not attach modules when grinding wheel is moving.
• Do not use the grinding wheel without a module in place.
• Before removing a module, switch off on the Power Unit and allow the grinding wheel to come to a stop.
To Next Page
Loading...