Need help?Do you have a question about the Platinum 4300 TL and is the answer not in the manual?
General| Nominal AC Voltage | 230 V |
|---|---|
| Dimensions | 475 x 440 x 176 mm |
| Weight | 17 kg |
| Protection degree | IP65 |
| Frequency | 50/60 Hz |
| Waveform | Pure Sine Wave |
| Max. AC Power | 4300 W |
| Protection Features | Over Voltage, Short Circuit, Over Temperature |
| Operating Temperature | -25°C to 60°C |
Explains warning signs, symbols, and their meanings on the device.
Crucial safety rules and potential hazards for inverter operation.
Specifies intended applications and inverter functions.
Lists package contents and unpacking steps for the inverter.
Steps for mounting, including critical safety warnings.
Instructions for connecting AC and DC power sources.
Warnings about hot surfaces and connector compatibility.
Step-by-step guide for the inverter's first startup.
Highlights essential settings required post-startup.
Setting language and network scanning for inverters.
How inverters are identified and assigned numbers in a network.
Procedure for setting country-specific parameters.
Steps to set the internal date and time.
Balancing AC power across phases for optimal load.
Procedures for replacing inverters and reassigning numbers.
How to use the DC disconnector for the solar generator.
Explains the inverter display, LEDs, and control keys.
Navigating the inverter's standard display screen.
How to navigate the main menu options.
Explains physical values and evaluation graphs.
Explains units (W, kWh, EUR, kg) and graphic elements.
Displays current electrical values for DC and AC sides.
Meaning of displayed values like power, energy, CO2.
Options for viewing data over different time frames.
Configuring time, date, daylight saving, and language.
Adjusting alarm volume and relay contact.
Adjusting display contrast and brightness.
Setting rebates and system identification.
Metering energy and accessing system data.
Displays inverter model (type) and serial number (S/N).
Shows firmware, hardware, EIA485, and bootloader versions.
Identifying fatal errors and immediate actions.
Handling blocking errors and service intervention.
Details transient errors and warnings.
Procedure to access advanced service functions.
Understanding detected events and error codes.
Explanation of adjustable parameters like voltage and frequency.
Selecting operation modes for power balancing.
Configuring the maximum allowed unbalanced load limit.
Setting the response time for load balancing.
Information on inverter maintenance requirements.
Guidelines for cleaning the inverter safely.
Step-by-step instructions for safely removing the inverter.
Procedures to disconnect power and cables from the inverter.
Steps to remove the inverter and its mounting hardware.
Guide on how to pack the inverter for shipping.
Regulations and methods for disposing of the inverter.
Using event codes to diagnose and resolve issues.
Identifying fatal errors and immediate actions.
Handling blocking errors and service intervention.
List of standards the inverter meets.
Comprehensive technical data of the inverter models.
Official statement of compliance with EU directives.
Information on warranty coverage, period, and claims.
Conditions where warranty claims are excluded or limited.
Rules for transferring the guarantee and general warranty clauses.
To Next Page
