pleasant hearth WS-2417

To Next Page

05/13

60-10-002

Questions, problems, missing parts? Before returning to your retailer, call our

customer service department at 877-447-4768 8:30 a.m. - 4:30 p.m. CST,

Monday - Friday or e-mail us at customerservice@ghpgroupinc.com.

SAFETY NOTICE: IF THIS WOOD BURNING APPLIANCE IS NOT PROPERLY INSTALLED,

OPERATED, AND MAINTAINED, A HOUSE FIRE MAY RESULT.

TO REDUCE THE RISK OF FIRE, FOLLOW THE INSTALLATION INSTRUCTIONS. FAILURE

TO FOLLOW THE INSTALLATION INSTRUCTIONS MAY RESULT IN PROPERTY DAMAGE,

BODILY INJURY OR EVEN DEATH. CONTACT LOCAL BUILDING OFFICIALS ABOUT

RESTRICTIONS AND INSTALLATION INSPECTION REQUIREMENTS IN YOUR AREA.

This manual describes the installation and operation of the Model HWS-224172MH, non-catalytic

wood heater. This heater meets US Environmental Protection Agency’s emission limits for wood

heaters. Please read this entire manual before you install and use your new room heater.

This stove is listed by OMNI-Test Laboratories

of Portland, Oregon to meet UL1482 for the US

and ULC-S627 for Canada. (UM) 84 HUD, mobile

home approved.

6” Flue

required

Do Not Discard This Manual: Retain for Future Use

W arming Y our Home. Warming Your Heart.

High Efficiency Wood Stove - Small

Model Series:

HWS-224172MH

HWS-224172

WS-2417

LWS-124171

TESTED TO: UL 1482-1996/ULC-S627-00

REPORT NO. 418-S-03-2

6440 W. Howard St.

Niles, IL 60714-3302

877-447-4768

BEFORE LIGHTING YOUR FIRST FIRE, REMOVE PLASTIC FILM OFF TRIM AND CLEAN THE

PLATED SURFACES WITH DENATURED ALCOHOL OR A GOOD QUALITY, NON-ABRASIVE LIQUID

GLASS CLEANER. APPLY WITH A VERY SOFT, CLEAN CLOTH. DO NOT USE PAPER TOWELS

TO CLEAN THE PLATED PARTS. FAILURE TO CLEAN ALL MARKS AND FINGERPRINTS FROM

THE PLATED SURFACES WILL CAUSE PERMANENT DAMAGE.

NOTE: Some states and provinces do not allow the exclusion or limitation of incidental or consequen-

tial damages. The above limitations may not apply to you.

WARNING

Other manuals for pleasant hearth WS-2417

Manual61 pages

Need help?

Do you have a question about the pleasant hearth WS-2417 and is the answer not in the manual?

Summary

BEFORE INSTALLATION OF YOUR APPLIANCE

OPERATION

CORRECT FLUE SIZE IMPORTANCE

Explains the critical role of correct flue size for proper draft and appliance performance.

MOBILE HOME APPROVAL

OUTSIDE AIR KIT INSTALLATION

Details the necessity and procedure for installing an outside air kit for combustion in mobile homes.

BAFFLE INSTALLATION

INSTALLATION PROCEDURES

COMBUSTIBLE MATERIAL CLEARANCES

Specifies required safe distances from stove and pipe to combustible surfaces.

STOVE PIPE INSTALLATION GUIDELINES

Provides instructions and requirements for connecting and installing stove pipe sections.

FLOOR PROTECTION REQUIREMENTS

CHIMNEY SYSTEM

FLUE DRAFT CONSIDERATIONS

Discusses factors influencing flue draft and how appliance performance is affected.

VENTING SYSTEMS

TOOLS AND SUPPLIES

PRE-USE INSPECTION CHECKLIST

CHIMNEY REQUIREMENTS

CHIMNEY CONNECTOR REQUIREMENTS

Defines requirements for the pipe connecting the stove to the chimney.

THIMBLE REQUIREMENTS

Details the device for passing the chimney connector through walls safely.

PREFABRICATED METAL CHIMNEY SYSTEMS

Outlines requirements for prefabricated metal chimney systems and components.

THIMBLE INSTALLATION

THIMBLE AIR CLEARANCES

Specifies the minimum air clearances required around the thimble for safety.

INSTALLING CHIMNEY COMPONENTS

CHIMNEY CONNECTOR INSTALLATION

Provides instructions for installing the single wall connector pipe to the appliance and chimney.

CHIMNEY TERMINATION REQUIREMENTS

2-10-3 RULE FOR CHIMNEY HEIGHT

Details the 2-10-3 rule for chimney height relative to roof structure for safety.

MOBILE HOME INSTALLATION

WOOD STOVE QUICK START GUIDE

OPERATION DETAILS

WOOD FUEL SPECIFICATIONS

Discusses the types of wood suitable for burning and their impact on efficiency and emissions.

FIRST BURN - STOVE PAINT CURING

Guides users through the critical first few burns to cure the stove's paint coating.

FIRE STARTING AND AIR CONTROL

Details the process of starting a fire and adjusting the air control for optimal burning.

GLASS CARE AND REPLACEMENT

GASKET REPLACEMENT

Provides instructions for replacing door and glass gaskets to ensure a proper seal.

CREOSOTE FORMATION AND REMOVAL

Explains creosote formation, risks, and the need for regular inspection and removal.

CREOSOTE PREVENTION AND ASH DISPOSAL

FIRE STARTING HELPFUL HINTS

Offers practical advice and step-by-step guidance for successfully starting a fire.

FIREWOOD SELECTION AND QUALITY

Discusses the best types of wood for burning and their impact on performance and emissions.

TROUBLESHOOTING POOR DRAFT

COMMON CAUSES OF POOR DRAFT

Identifies atmospheric pressure, environmental conditions, and chimney issues affecting draft.

CHIMNEY FACTORS FOR DRAFT

Covers how installation and maintenance impact chimney draft and performance.

QUICK REFERENCE MAINTENANCE GUIDE

5 YEAR WARRANTY

WARRANTY SERVICE REQUIREMENTS

WARRANTY REGISTRATION PROCESS

Outlines the process and importance of registering the product's warranty.