Need help?Do you have a question about the Plinius 8100 and is the answer not in the manual?
General| Type | Integrated Amplifier |
|---|---|
| Power Output | 100W per channel (8Ω) |
| Total Harmonic Distortion (THD) | <0.05% |
| Input Impedance | 47kΩ |
| Signal to Noise Ratio | 90dB, A-weighted |
Fields for recording amplifier serial number, date of manufacture, and test certification.
Critical instruction emphasizing the importance of reading the manual before use.
Details on amplifier's output power, peak current, and heat generation risks.
Warning about hazardous voltage levels and recommendation for professional servicing.
Prohibits connecting inputs to outputs and incorrect earthing of terminals.
Caution to avoid placing the amplifier where liquids or foreign objects can enter.
Ensures only suitable high-fidelity loudspeakers are connected to output terminals.
Describes the main power switch operation and the power LED status.
Explains the rotary control for selecting audio input sources.
Details the function of the rotary switch for selecting recording sources.
Operation of the volume knob and remote control for level adjustment.
Indicates amplifier mute status or reception of remote control signals.
RCA connectors for inputting audio signals from source components.
Five-way binding posts for connecting loudspeakers, supporting bi-wiring.
RCA outputs for connecting line-level recording devices.
How the front panel mute switch disconnects the amplifier output.
Line-level output for connecting to an external power amplifier.
IEC socket for mains connection, containing a fuse holder.
Internal fuses protecting power rails, with LED indicators for blown fuses.
Guidelines for positioning the amplifier and ensuring adequate airflow.
Instructions for checking supply voltage and connecting the mains power.
Crucial instruction to connect all inputs/outputs before powering on.
Detailed steps for connecting CD players, tuners, and other sources to RCA inputs.
Guide for correctly connecting speaker wires to the output terminals.
Connecting recording devices to tape outputs for music recording.
Connecting to external amplifiers or using the unit as a pre-amp.
Ensuring secure and proper wire/plug connections for optimal performance.
Instructions for using two pairs of speaker cables per channel.
Ensuring correct wiring for optimal stereo imaging and bass response.
Final steps for connecting the mains cable and powering on the amplifier.
Recommendation for allowing the amplifier to warm up for optimal sound.
Details on the three-function remote control and battery replacement.
Feature preventing system damage from incorrect tape recording attempts.
Procedure for replacing internal rail fuses and important warnings.
Information on the mains fuse location, rating, and replacement.
Guidance on choosing high fidelity loudspeakers suitable for the amplifier.
Importance of loudspeaker impedance (4-8 ohms) for amplifier performance.
Detailed specifications on power output into 8/4 ohms and harmonic distortion.
Technical details including frequency response, hum & noise, and input sensitivity.
Physical measurements (height, width, depth) and weight of the unit.
Information on Audible Technologies Ltd., including contact phone, email, and website.
To Next Page
