Need help?Do you have a question about the Plinius 9200 and is the answer not in the manual?
General| Type | Integrated Amplifier |
|---|---|
| Frequency Response | 20Hz to 20kHz ±0.2dB at rated output. -3dB points below 5Hz and above 70kHz |
| Total Harmonic Distortion | Typically <0.02% at rated output |
| Input Impedance | 47k ohms |
| Dimensions | 17" wide x 15.75" deep x 4.75" high (430mm x 400mm x 120mm) |
| Weight | 26.5 lbs (12kg) |
| Gain | 32dB |
| Signal to Noise Ratio | 100dB A-weighted, ref. rated output |
| Damping Factor | >200 |
| Power Output | 200W per channel (8Ω) |
| THD | <0.05% at rated power |
Guidance on cleaning and protecting RCA connectors to maintain signal integrity.
Recommendations for periodic use of switches to ensure contact longevity.
Instructions for cleaning the amplifier's exterior surfaces using appropriate materials.
Important warnings regarding electrical hazards, heat generation, and operational risks.
Explanation of the front panel LED's function and behavior during operation and mute.
Details on using the rotary switch to select inputs for recording purposes.
Description of the rotary switch for selecting audio sources for playback.
Information on the motorized volume control and its adjustment via manual or remote.
Details on the heavy-duty rocker switch for powering the amplifier ON or OFF.
Explanation of various input terminals, including RCA and phono, for source components.
Description of balanced XLR inputs for source components with XLR outputs.
Switch to select between CD RCA and CD XLR input connections.
Details on the loudspeaker output binding posts for connecting speakers, supporting bi-wiring.
RCA outputs for connecting line-level recording devices for music recording.
Functionality of the mute switch to silence the preamplifier output.
Switch to disconnect signal ground from chassis to resolve hum loops.
Connections for multi-channel sound processors for home theatre integration.
Controls amplifier operation with normal inputs or processor return input.
Line-level output for connecting to an external power amplifier.
Connector for the mains supply cable, including integrated fuse holder.
Location and function of rail protection fuses with indicator LEDs.
Chassis-connected earth post for use with vinyl turntables.
Instructions for verifying and connecting the mains voltage supply correctly.
General guidance on making input/output connections in the correct sequence.
Detailed steps for connecting source components via RCA or XLR cables.
Procedure for connecting loudspeakers to the amplifier's output terminals.
Ensuring high-performance connections by checking termination tightness and strand integrity.
Explanation of bi-wiring technique using dual loudspeaker terminals.
Importance of correct wiring for stereo imaging and bass response.
How to record music using tape outputs and the record selector.
Using the processor connections for integration with home theatre systems.
How to use the Pre-Out connection for pre-amplifier only operation or to another amplifier.
Step-by-step guide for connecting the amplifier to the mains power supply.
Information on the recommended warm-up period for optimal sound quality.
Description of the three-function remote control and battery replacement.
How to adjust the phono stage gain for different turntable specifications.
Explanation of the feature preventing recording of own output and protecting speakers.
Procedure for replacing blown fuses and understanding fuse warning LEDs.
Details on the mains fuse, its location, and replacement guidelines.
Explanation of the auto-reset thermal sensor and its function.
Steps to diagnose and resolve issues when no audio is produced by the unit.
Explanation of error mode activation by tape lockout and its resolution.
Troubleshooting steps for quiet or distorted audio, including checking rail fuses.
Diagnosing power failure issues, including mains fuse and thermal overload protection.
To Next Page
