1 4
Now that your Plinius 9200 is configured correctly, switch the power switch on the rear
panel to ON. The display LED will cycle in brightness for approximately ten seconds
as the internal circuitry stabilises. You can now enjoy your new Plinius 9200 Integrated
Amplifier.
NOTE: This unit must be connected to a mains socket outlet with a protective earthing
connection. The wall outlet socket or mains switch must be accessible at all times in
case of emergency.
WARM-UP PERIOD
You will find that the Plinius 9200 will become noticeably ‘purer’ in sound after being
on for a period of time. We usually recommend waiting at least 24 hours before
expecting the best quality of sound reproduction from your amplifier. Also, as the
Plinius 9200 uses very little power while on, we suggest leaving the unit turned on so
that it will always be at its sonic best.
To Next Page
Loading...
