Do you have a question about the Plinius P7 and is the answer not in the manual?
continuous power into 8 ohms | 100 Watts |
---|---|
continuous power into 4 ohms | 160 Watts |
dynamic headroom | 1dB or greater at 8 ohms |
voltage swing | 87 Volts peak to peak per channel |
current output | 30 Amps short duration continuous per channel |
frequency response | 20Hz to 20kHz ± 0.2dB |
---|---|
frequency response roll-off | -3dB at 5Hz, -3dB at 90kHz |
total harmonic distortion | 0.1% THD |
intermodulation distortion | 0.05% and IM at rated power |
input sensitivity | 1.2V RMS |
---|---|
input impedance | 47k ohms |
input overload | 5V RMS |
height | 100mm |
---|---|
width | 440mm |
depth | 300mm |
weight | 8kg |
Covers warnings against removing covers, connecting incorrect inputs/outputs, and liquid exposure.
Caution against fitting a fuse with a higher rating without consulting a qualified dealer.
Disconnect mains power before opening the amplifier due to hazardous voltages inside.
Details power output, frequency response, distortion, and input sensitivity.