Need help?Do you have a question about the Plinius JARRAH and is the answer not in the manual?
Ensure heat vents are unobstructed and avoid RF interference from other equipment.
Verify mains voltage and correctly connect the power supply lead using the IEC socket.
Crucial warning to connect inputs/outputs before powering up the preamplifier.
Ensure all interconnection cables are snug and fully inserted for optimal performance.
Proper wiring ensures good stereo imaging; use test discs to verify channel orientation.
Adjust internal mini-switches for specific phono cartridge loading requirements.
Set phono stage to high or low gain using internal jumpers based on turntable specs.
Location and replacement of the mains/line fuse within the IEC socket.
How to change the voltage setting on the power supply for different regions.
To Next Page
General
