12
PS1_0001 [EN]
Mandatory
action
To charge the device, connect
the parts in the correct order.
Failing to do so might cause an
unexpected accident or malfunction.
(For the correct order to connect the
parts, see Page 18.)
Mandatory
action
To charge the device, make sure
that the connectors and plugs
are firmly connected.
If the Micro USB Cable or AC Adaptor
is not firmly connected, this might
cause charging failure, or result in a
fire, electric shock or malfunction.
Mandatory
action
When you unplug the AC
Adaptor from the electrical
outlet, hold the adaptor firmly.
If you hold the Micro USB Cable to pull
out the AC Adaptor, this might cause
cable line breakage or unexpected
malfunction of the AC Adaptor. Be
sure to hold the AC Adaptor when you
unplug it from the electrical outlet.
Mandatory
action
When you unplug the Micro
USB Cable, hold the connector
firmly.
When you unplug the Micro USB
Cable, be sure to hold the connector
firmly. If you unplug the Micro USB
Cable by holding the device or
cable portion, this might cause a
malfunction such as line breakage of
the cable.
Mandatory
action
After the device is fully
charged, disconnect the Micro
USB Cable and AC Adaptor.
If you leave the adaptor or cable in the
connected state, this might cause a
malfunction.
Mandatory
action
After using, close the Sliding
Cover.
If you leave the Sliding Cover open,
dust or other foreign substances
might get into the device, and this
might cause a malfunction.
To Next Page
Loading...
