31
PS1_0001 [EN]
When you hold down the Action
Button to start heating, the Mode
Indicator LED turns o.
The remaining battery level is
extremely low. Please charge
the battery (Page18). If
charging does not resolve
the issue, there may be a
malfunction. Discontinue use of
the device and contact “Ploom
Exclusive Customer Service”
(back cover).
When you try to charge the battery,
all of the LEDs flash continuously.
This error may occur when the
battery is completely depleted
(the LEDs will not light up even
when you hold down the Action
Button with the Sliding Cover
closed) and you try to charge
it using a product other than
the dedicated/recommended
AC Adaptor and Micro USB
Cable. The device will not
charge under these conditions.
Charge the battery using the
dedicated/recommended AC
Adaptor and Micro USB Cable.
To Next Page
Loading...
