Driver Installation
NOTE: Monitors may blink during driver installation
and system may need to be rebooted
Windows
®
10 / Windows 8.1 / Windows 7
Windows Vista
®
/ Windows XP and
Mac OS
®
10.8.3 or higher
Step 1. Do not connect network cable to docking
station until drivers are installed
Step 2. Make sure PC or tablet has an open
internet connection
Step 3. Connect docking station to PC or tablet
using provided USB cable
Step 4. Windows Update will install the most
recent drivers automatically
Step 1. If drivers were not received from Plugable
via email soon after purchase, download most
recent drivers from:
plugable.com/products/ud-3900
(If internet connection is not available, drivers are
located on enclosed CD. For optimal performance,
updated drivers should be downloaded periodically.)
Step 2. Install drivers and connect UD-3900
Questions? We’re here to help. Email:
support@plugable.com
| 3
To Next Page
Loading...
