Volume logger MacR6
Installation Manual
e) After pairing is done, serial number of device and its
configuration will be readout. On the display of device
blinks icon (F)
f) After readout is complete a menu which allows for basic
configuration is displayed. Option “Ustawienia” allow for
programming of parameters which are common for larg-
er group of devices (i.e. parameter APN).
g) Option „więcej parametrów” allow for programming of ad-
ditional parameters. When cell phone have GPS connec-
tion, then with option “Lokalizacja” user can program into
MacR6 its current localization. This information can be al-
so set manually
h) Save new configuration to device – use button
„Programuj”
i) Save new configuration to device – use button.
j) Verify on the display of device that the changes are im-
plemented.
To Next Page
Loading...
