Plum MacR6 User Manual

PLUM Sp. z o.o. Ignatki 27A 16-001 Kleosin Tel. +48 857497000 Fax +48 857497014
www.plum.pl plum@plum.pl
INSTALLATION MANUAL FOR GAS METER
DOCUMENT EDITION: 1.1
IS RELATED TO SOFTWARE: 002.01
May 2014
1. Preparation of device for installation
Shipped device may have turned off display, which suggest enabled storage operating mode
(battery save). In order to turn on the device user need to quickly touch four times OPTICAL INTER-
FACE window with magnet. This procedure will enable first function of device menu called “SLEEP 3”. At
this point all indicators (A), place on the left side of the display will turn on and the start to dim out in se-
quence (from down to up). After touching device with magnet before all icon will dim out, on display will
show sign “SLEEP2”, then “SLEEP1” and “START” – after time indicated by progress bar – device is
enabled.
magnes ↓↑
magnes ↓↑
magnes ↓↑
magnes ↓↑
Data logger MacR6
Place for approximation or application of the
magnet
Adapters (overlays) for gas meter METRIX and
INTERGAZ

Plum MacR6 Specifications

General

Processor	Mediatek MT6580
RAM	1 GB
Internal Storage	8 GB
Display Size	5.0 inches
Resolution	480 x 854 pixels
Rear Camera	5 MP
Front Camera	2 MP
Battery	2000 mAh
Network	2G, 3G
Bluetooth	4.0
GPS	Yes
FM Radio	Yes
Operating System	Android
CPU	Quad-Core 1.3 GHz
Expandable Storage	microSD, up to 32 GB
SIM Type	Dual SIM (Micro-SIM)
Wi-Fi	802.11 b/g/n

Summary

Preparation of Device for Installation

Device Installation

Configuration via OptoBTEx Interface

Basic Configuration Menu

Access basic configuration menu; "Ustawienia" for common parameter programming.

Advanced Parameter Configuration

Program additional parameters and localization (GPS or manual).

Configuration via SMS Message

SMS Message Structure

Defines the format for SMS messages used for device configuration.

Common Configurable Parameters

Lists common parameters and their abbreviations for SMS configuration.

SMS Configuration Operating Steps

Enable Service Option SEr 5

Activate service option SEr 5 using magnet touch.

Display Icons Behavior

GSM Modem Status Icons

Describes icons related to GSM modem connectivity and SIM card status.

Data Transmission Icons

Explains icons indicating data sending, receiving, and errors.

Interface and Interference Icons

Details icons for OptoBTEx interface status and magnet interference.

Pulse Input and Battery Icons

Describes icons for pulse input changes and battery charge level.