Need help?Do you have a question about the Plustek OpticSlim 2600 and is the answer not in the manual?
General| Scanner Type | Flatbed |
|---|---|
| Image Sensor | CIS |
| Light Source | LED |
| Hardware Resolution | 1200 x 1200 dpi |
| Color Depth | 48-bit |
| Grayscale Mode | 16-bit |
| Interface | USB 2.0 |
| Scan Area | 8.5" x 11.7" (216 x 297 mm) |
| Scanning Speed (Color) | 10 seconds |
| Scanning Speed (B&W) | 8 seconds |
| Power Supply | USB bus-powered |
| Maximum Resolution | 19200 x 19200 dpi (interpolated) |
Provides crucial safety information to prevent injury and device damage.
Outlines the necessary software and disk space for installation.
Details the computer's hardware needs, especially USB ports.
Provides step-by-step instructions for connecting the scanner and installing software.
Procedures to verify scanner functionality after installation.
Common problems and solutions for software installation issues.
Explains how to use the scanner with software like image editors and OCR.
Guide on how to calibrate the scanner for accurate color reproduction.
Advice on maintaining the scanner's performance and lifespan.
To Next Page