Need help?Do you have a question about the Pluto Trigger and is the answer not in the manual?
General| Connectivity | Bluetooth 4.0 |
|---|---|
| Compatibility | iOS and Android smartphones |
| App Support | iOS and Android |
| Triggering Modes | Sound, light, motion |
| Smartphone Control | Yes |
| Shutter Release | Yes |
| Operating Range | Up to 30 m |
Screw the hot shoe adapter into the Pluto Trigger device.
Install the Pluto Trigger onto the camera's hot shoe mount.
Connect one end of the camera cable to the Pluto Trigger's camera port.
Plug the other end of the camera cable into your camera's remote port.
Turn on the camera and set the lens to Manual Focus mode.
Turn on the Pluto Trigger and open the dedicated mobile application.
Follow steps to pair your app with Pluto Trigger for the first use.
Tap the spinner icon to access the device scan screen within the app.
Locate your Pluto Trigger by its 'PT******' ID in the device scan list.
Grant GPS (Android) or enable Bluetooth (iOS) for the app to detect the trigger.
Press and hold the Pluto Trigger button for 5 seconds to turn on Bluetooth.
Click the Pluto Trigger's icon in the app to establish a wireless connection.
Verify connection via LED, sound, and battery icon on the app's main screen.
In Shutter Release mode, press the start button to test your camera.
Select Timelapse, choose Standard Preset, and press the start button.
The Pluto Trigger runs the Timelapse program, showing shots taken and time remaining.
To Next Page