Every component that appears in a PMC product is measured, tested, matched
and recorded by hand. This analysis also applies to the nal product we build to
ensure you receive an identical replica of the reference model.
You can be reassured that the below criteria has been carefully checked by the
individual builder of your new prodigy series loudspeakers.
INSPECTION
Crossover matching
Enclosure nish
Assembly & Wiring
Driver installation
Enclosure seal
Level - frequency
Impedance - frequency
Pair matching
Listening test 1
Listening test 2
Final inspection
Accessory pack
Quick start guide
To Next Page
Loading...
