Quick Start-up Guide TMS Series
TMS Quick Start-up Guide.docx
Page 8 of 24 November 21, 2017
Programming Float Height Offsets using TMS Communicator
1) Install TMSComm on your computer.
a. Insert TMSComm CD-ROM and follow on-screen instructions.
2) Start TMSComm by clicking on Pneumercator in the Start menu under Programs or All
Programs and then clicking TMSComm.
3) Sign into the TMSComm Administrator account.
a. Click on the Options menu and click on the Security tab.
b. Click the Login… button and enter the User Name and Password.
User Name: ADMIN Password: ROBUST
Note: the password for TMSComm before version 94 is JONESTOWN.
4) Create a Site to connect to.
a. Click on the Sites menu and click Select Sites.
b. Click the New Record button.
Note: If you already have a site configured, simply select the site by clicking on its name
and clicking the Close button. Proceed with Step 5.
c. Enter a Site Name.
d. Verify the settings below Site Name match Figure 3, the default values for the TMS.
Note: COM Port must be set according to your computers hardware settings.
e. Click the Close button.
Figure 3 – TMSComm Direct Connect Site Default Settings
To Next Page
Loading...
