PNI DK110 - Relay Delay and Door Closing Modes

11 - User manual
By card + PIN code
* Master code # 31 #
Note: Before activating this function, associate a PIN code
with a new card. For details, read the chapter “Bind a PIN code
to a specific card”.
Note: To open the door, read the card first, then enter the PIN
code + #.
By card or PIN code
* Master code # 32 #
Note: Open the door by typing the PIN code + # or reading the
card (default setting).
4. Relay delay time and door closing modes
Note: As long as the door is open (lock unlocked), the green
LED stays on. After closing the door (lock locked), the LED
turns red.
Door relay delay time
* Master code # 4 # 0~99 #
Note: Open door - between 0 and 99 seconds. Default setting:
5 seconds.
Stand-alone access control mode
* Master code # 50 #