To Next PageTo Next Page
Need help?Do you have a question about the PNI DK220 and is the answer not in the manual?
Lists key attributes like housing, card reader, key illumination, tamper alarm, and user management.
Instructions for mounting the device and connecting cables.
Details wiring connections for Zone 1, including doorbell, alarm, and relays.
Details wiring connections for Zone 2, including Wiegand output and AC input.
Covers changing master code, registering/deleting master cards, and duress alarm card registration.
Explains how to add user cards and PINs for Zone 1 and Zone 2.
Details anti-passback modes, Wiegand format, keypad transmission, alarm duration, and safe modes.
Describes the process of adding and deleting master cards for Zone 1.
Explains how to unlock the door using only a card.
Explains how to unlock the door using a card and PIN.
Explains unlocking the door using either a card or a PIN.
Details how to change the user PIN without entering programming mode.
Explains what happens when the device is tampered with.
Describes the alarm triggered by a door sensor and how to turn it off.
Explains the duress card/PIN function to open door and trigger alarm.
Describes the keypad functioning as a Wiegand card reader.
Explains the mode for controlling a single door with card, PIN, or card+PIN.
Explains the mode for controlling two doors with card or PIN.
Describes controlling two doors with an external reader.
Explains a mode for advanced security with two interconnected units.
Details the anti-passback mode for single door access control.
Explains the anti-passback mode for two doors, often used in parking lots.
Diagram for single door stand-alone access control.
Wiring diagram for single door access with common 12V DC supply.
Wiring diagram for single door access with special 12V DC supply.
Wiring diagram for single door access with common 12V AC supply.
Diagrams for external reader, stand-alone two doors, interconnected, and anti-passback.
Wiring diagram for two doors with external reader using common 12V DC.
Wiring diagram for two doors with external reader using special 12V DC.
Wiring diagram for two doors with external reader using common 12V AC.
Wiring diagram for Wiegand card reader connection.
General