To Next PageTo Next Page
Need help?Do you have a question about the PNI DK110 and is the answer not in the manual?
Details the PNI DK110 as a stand-alone access control device and EM card reader.
Lists key attributes like low power consumption, Wiegand interface, and access modes.
Provides essential technical details such as voltage, distance, capacity, and temperature.
Instructions for mounting the device and passing cables through the bracket.
Explains color-coded wiring for input, output, power, and accessory connections.
Illustrates wiring for common power supply, special power supply, and card reader modes.
Explains LED indicators and sounds for different device statuses.
Instructions for adding and deleting users via card, ID, or PIN code.
Details setting access modes like card-only, PIN-only, or card + PIN.
Configuration options for door relay delay time and door closing behaviors.
Procedures for exporting and importing device data for backup or transfer.
Covers adding/deleting public PINs and binding PINs to specific cards.
Steps for resetting the master code and performing master card operations.
Statement of compliance with EMC Directive 2014/30/EU and related link.
General