12 - User manual
Note: The door will lock automatically immediately after you
open it.
Relay toggle mode
* Master code # 51 #
Note: After opening it, the door will not lock automatically. To
lock the door, the user must press the access button or:
1. Read the card, if Read card has been set as the access mode
2. Read the card or input the PIN code, if Read card or PIN
code has been selected as the access mode.
3. Read the card and input the PIN code + #, if Card + PIN code
has been chosen as the access method.
Wiegand card reader mode
* Master code # 52 # 26/34 #
Note: WG26/34 input and output. To lock the door, the user
must read the card on the Wiegand card reader.
5. Backup
Export data
* Master code # 70 #
Note: Export the data to an external device.
Import data
* Master code # 71 #
To Next Page
Loading...
