PNI DK220 - Quick Programming Guide; Administrator settings

8 - User manual
Quick Programming Guide
1. Administrator settings
* Master code #
00
Input the new
Master code #
Repeat the new
Master code #
Change Master code.
Note: The default
master code is 999999.
The master code must
have between 6 and 8
digits.
01 Read the card
Master card
registration for
adding cards.
Note: Default: zone 1.
02 Read the card
Master card
registration for
deleting cards.
Note: Default: zone 1
03 Read the card
“Duress” alarm card
registration for zone 1
04 Read the card
“Duress” alarm card
registration for zone 2