To Next PageTo Next Page
Need help?Do you have a question about the PNI House IP716LR and is the answer not in the manual?
General| Compression Format | H.264 |
|---|---|
| Video Output | HDMI, VGA |
| Hard Drive Support | 1 SATA HDD |
| Storage Capacity | Up to 6TB |
| Number of Channels | 16 Channels |
| Network Interface | RJ45 10/100Mbps |
| Power Supply | 12V DC |
| Mobile Viewing | Yes (via app) |
Install SATA HDD before first use. Max capacity 14TB.
Start with a 230V outlet. Shutdown via menu or power supply.
Notes on restarting after power failure and battery replacement.
Control NVR locally or remotely from smartphones and computers.
Log in using default password and secure the system.
Guide starts on device startup. Recommended before final installation.
Set time, date, time zone, and change authentication password.
Configure network parameters and install the XMEye mobile application.
Adjust display resolution and test network configuration.
Right-click on the main preview interface to open the menu.
Lists main functions like Playback, Record Conf, Network, Date Time.
Search recordings by channel, date, time, or file type.
Set recording file length, mode, period, and type.
Configure IP address, gateway, DNS, ports, and DHCP.
Set time zone, date, time, and format.
Access General, Encode, Backup, Snapshot Config, Display, Account settings.
Configure language, storage behavior, session duration, and startup guide.
View and configure camera parameters like resolution and compression.
Install storage, detect device, and perform backup.
Set up cyclic captures and send via email, FTP, or store locally.
Configure preview mode elements like time, channel name, and resolution.
Manage users, rights, passwords, groups, and security levels.
Configure motion detection behavior, sensitivity, and action area.
Handle storage errors, network issues, or IP conflicts.
Manage missing image or video signal events.
Check HDD status and set read/write mode.
Update firmware using a USB stick.
Schedule restarts and automatic file deletion.
Reset selected system settings.
Save or load system configuration settings.
Add cameras to channels by searching the network.
View connection status for all 16 camera channels.
Check max cameras and resolution support.
View the history of system actions.
Check firmware, serial number, and app QR code.
Add and manage cameras in the system.
Steps to add cameras: protocol, search, add, configure.
Operations like delete, edit, upgrade, and network detect.
Rename cameras.
Configure NVR network parameters.
Disable IP adaptation for cameras.
Set the recording mode (manual or programmed) for each channel.
Shortcut for accessing the search and playback interface of recordings.
Interface only available for cameras supporting this feature.
Adjust color parameters like brightness, contrast, and saturation.
Select how to display cameras on the same screen.
Set volume and image parameters.
Monitor and diagnose camera connections.
Monitor, diagnose, and configure network and Cloud server.
Monitor data traffic performed by the NVR.
Log out, shut down, or restart the system.
