Do you have a question about the PNI R40 Pro and is the answer not in the manual?
Frequency | 26.965 - 27.405 MHz |
---|---|
Channels | 40 |
Power supply | Li-ion battery (7.4V, 2000mAh) |
Frequency Range | 26.965 - 27.405 MHz |
Output Power | 4W |
Type | CB Radio |
Power | 4 W |
Antenna connector | SO239 |
Modulation | FM |
Operating Temperature | -26°C to +60°C |
The LED turns red in emission and green in reception.
Rotate knob to change channels. Channel 16 is the scanning channel.
Turn clockwise to power on. Adjust volume by turning both ways.
Press button to emit, release button to receive.
Deactivates squelch to receive weak signals. Press/hold to hear background noise.
Press button to turn the flashlight on.
2-pin connector for audio accessories.
Check battery installation and charge status.
Verify frequency, CTCSS code, and ensure you are within range.
Ensure the microphone is unobstructed. Seek service if issue persists.