Need help?Do you have a question about the PNI Escort HP 8000 ASQ and is the answer not in the manual?
Connects the electric condenser microphone and its 6-pole plug.
Up/Down keys on the radio and microphone for channel selection.
SQ and ASQ knobs for managing background noise and signal reception.
Knob for turning the radio ON/OFF and adjusting audio volume.
Switches for AM/FM modulation and emergency/normal channel modes.
TX/ASQ LED, RX Signal Meter, and digital channel display.
Antenna, 13.8V DC power, and external speaker jacks.
PTT button to initiate transmission and receive mode.
Selecting a position and mounting the radio unit in the vehicle.
Connecting the DC power cable with attention to polarity.
Installing a specific mobile antenna for the 27 MHz range.
Steps to verify correct operation after connecting system components.
Advice on power polarity, fuse replacement, and antenna connection.
Legal transmitting powers and channel configurations by country in Europe.
To Next Page
General
