MiniTT1 OO Plus II, MultiMAX, Integrated, or FlexTT5
connected to manual flash
Remote flash with or without E-TTL flash on camera
1. Slide MiniTT1 Transmitter onto camera.
2. If desired, slide Canon E-TTL Speedlite onto MiniTT1 radio.
3. Make sure all your PocketWizard radios are on the same channel and trigger normally.
Note: Manual remote flashes are not calculated as part of the E-TTL exposure.
Use PocketWizard Utility to engage HyperSync
™
and explore faster than X-sync shutter
speeds. Visit www.PocketWizard.com for more information.
Manual Flash
English
7
To Next Page
Loading...