point POFT7036 - Operations and Controls; Remote Control Functions; Battery Installation and Warnings

Remote Control (Fig.4)
1. “ ” ON/OFF BUTTON
The “ON” button is for switching on the fan . The fan will
start at breeze step.
Press the “OFF” button to turn the fan o.
2. “ ” SPEED BUTTON
When the fan has started, press this button repeatedly
to change speed “1-2-3” circulatory.
3. “ ” MODE BUTTON
Press this button to select mode. The sequence is normal, natural,
and sleep. The light indicates the selected mode state.
4. “ ” OSC/LOUVER BUTTON
After the fan has started, press this button to select oscillation mode.
The lights on the display indicates the selected fan oscillation mode.
5. “ ” TIMING BUTTON
Press this button repeatedly to set the
time for air delivery. Increase in
increments up to "1-2-3-4-5-6-7" hours.
BATTERIES
(batteries not included)
(1) Slide the battery compartment cover open.
(2) Insert the batteries, and make sure that the
batteries are placed as shown in the Fig.5.
(3) Slide back the battery cover.
NOTES: Use size “AAA” manganese or alkaline
batteries. Do not use rechargeable batteries.
OPERATIONS
Fig.4
Fig.5
Remote controller
Battery Battery cover
GB
7