EasyManua.ls Logo

point POHB338USB - Maintenance and Storage; Switching Off; Cleaning Instructions; Storage Guidelines

Default Icon
44 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Switching off
The appliance switches off when you release the push button.
Cleaning
WARNING:
Always disconnect the accessories before cleaning.
Never immerse the motor housing in water for cleaning. It could cause an
electric shock or fire.
The blades of the blender rod are very sharp. Be especially careful.
CAUTION:
Do not use a wire brush or other abrasive objects.
Do not use sharp or abrasive cleaning agents.
Do not use a dishwasher for cleaning.
To pre-clean the blending foot, fill a container with hot water and operate the
blender rod in it as described in “Operation”.
For thorough cleaning, separate the blending foot from the motor housing as
described in “Assembly/Disassembly.
The housing can be wiped with a slightly damp cloth. You can clean the
blending foot in warm rinsing water with a little hand dishwashing detergent.
Dry the blending foot well afterwards.
Storage
Clean the appliance as described and allow it to dry completely.
Always store the appliance out of the reach of children in a well-ventilated
and dry place.
The storage temperature should be between 10°C and 20°C.
We recommend storing the appliance in its original packaging if you do not
intend to use it for a long period of time.
Life of the rechargeable battery: Even when switched off, the rechargeable
battery discharges continuously. If the appliance is out of use for a longer
period of time, charge the rechargeable battery at least once every 4 to 6
weeks.

Related product manuals