E3 E6
E7 E8
E1 E2 E4
E5 Eb
TROUBLESHOOTING
Key checking points and trouble shooting
Abnormalities
After plugging in the power
cable and pressing the
“ON/STANDBY” key, the
“ON/STANDBY” indicator and
display do not light up.
The “ON/STANDBY” indicator
lights up and the display works
normally, but heating does not
start.
Heating suddenly stops during
the process.
1. Is the power plug properly connected?
2. Is the switch, power outlet, fuse or power
cable damaged?
1. Is the pot material
correct?
2. Is the induction cooker in a “Preset” working
status?
3. For other causes, take the induction cooker
to a repair and maintenance site to be
fixed.
1. Is the temperature of the oil too high when
frying dishes?
2. Is the temperature of the surroundings very
high?
3. Is the air inlet or air outlet of the induction
cooker blocked?
4. Is the default heating time of the induction
cooker over?
5. The self-safety protection o
f the induction
cooker starts, wait for several minutes and
connect power to use it.
Code of failure
1. Wait a moment and press the “ON/STANDBY”
button when the temperature of the hotplate
becomes normal, the induction hotplate will
operate as usual.
becomes normal, and then turn on the
hotplate, it will operate as usual.
1. Contact the maintenance department.
SPECIFICATION:
Model Applied
voltage/frequency
Dimension
(mm)
Weight
(kg)
Rated
power
POIC50 220-240V~ 50/60Hz
2000W 2.8350x280x68
GB
To Next Page
Loading...
