PointSource Montana - Specifications for Montana Sound Unit; Dimensions; Amplifier Specifications

Specifications for Montana Sound Unit:
Dimensions
Montana Sound Unit 2.0
Sound Unit Dimensions (WxHxD)
295x71.3x235 (Height incl. feet)
Net Weight
3.8kg
Amplifier Specifications
Rated Power at 4 ohm
100W
Signal / Noise Ratio better than
-74.5dB
Total Harmonic Distortion (1W/1kHz)
Total Harmonic Distortion (100W/1kHz)
0.045%
0.181%
IMD (SMPTE) – Left 1W (7kHz/60Hz)
IMD (SMPTE) – Right 1W
IMD (SMPTE) – Left 100W
IMD (SMPTE) – Right 100W
0.19%
0.18%
0.145%
0.156%
IMD (CCIF) – Left 1W (19.5kHz/1kHz)
IMD (CCIF) – Right 1W
IMD (CCIF) – Left 100W
IMD (CCIF) – Right 100W
0.005%
0.0025%
0.014%
0.035%
Others
Standby power consumption
=<0.5W
Sleep mode power consumption
???
On power consumption
???
WiFi module
2.4GHz (5GHz is not supported)
Main support bit rate
24bit / 48kHz