58
ADULT SECTION
Maintenance
Throttle Cable Lubrication
With the engine off, lubricate t he throttle
cable occasionally. T urn the handlebars
to the left and lubricate liberally with
Polaris All Season Grease.
Choke/Cable Lubrication
Lubricate the choke slide and cables
occasionally as shown. Operate the choke
intermittently before turning t he machine
off. This draws moisture out of the choke
plunger area and reduces the possibility of
the choke becoming frozen.
Throttle Cable Pivot Slug
Lubricate the throttle cable pivot
slug (A) every 50 hours or twice
a year using an aerosol lubricant.
Brake Lever Travel
Measure the clearance between the lever
and brake block. Inspection should be
made with the lever firmly depressed.
Distance B should be no more than 3/4″
(1.9 cm)
Excessive travel indicates a need for brake
cable adjustment.
A
B
To Next Page
Loading...
Need help?
General
