91
MAINTENANCE AND LUBRICATION
Adjustments
Steerin g In sp ection
The steering assembly of the vehicle should be checked periodically for
loose nuts and bolts. Have your dealer tighten any loose nuts and bolts
before operating the vehicle.
Camb er an d Caster
The camber and caster are non-adjustable.
Handlebar Adjustment
The handlebars can be adjusted for
rider preference.
1. Locate handlebar bolts (1) by
removing the upper headlight pod.
2. Loosen the four bolts.
3. Adjust the handlebar to the desired
height. Be sure t he handlebars do not
contact the gas tank or any other part of
the machine when turned fully to the l eft or right.
4. Torque the front two bolts to 10-12 ft. lbs. (14-17 Nm), then torque
the rear two bolts. A gap of up to 1/8” will remain at the rear bolts.
Optional Suspension Springs
Although the P olaris Sportsman 6x6 suspension has t he capability of
providing the best ride possible, the following accessory springs are
available to better suit individual riding preferences. NOTE: Optional
springs may be a different color than standard springs. Springs may be
painted to a desired color using Polaris touch up paint, available
through Polaris dealers.
Front Strut Spring 7041375- 067
OPTION
64/113 lb/in
7041450- 067
STANDARD
101 lb/in
N/A
Improper adjustment of the handlebars or incorrect torquing of
the adjuster block tightening bolts can cause limited steering or
loosening of the handlebars, resulting in loss of control and
possible serious personal injury or death. Follow the adjustment
procedures exactly, or see your Polaris dealer for service.
WARNING
1
SOFT FIRM
To Next Page
Loading...
Need help?
General
