101
MAINTENANCE
Track Maintenance
Track Tension
7. Tighten or loosen the track adjusting screws (E) to provide equal
adjustment on both sides of the track.
8. Repeat the measurement on t he other side of the track.
NOTE: Check more frequently when the machine is new.
9. Start the machine and slowly rotate the track at least five
revolutions. Let the track come to a stop (do not apply brakes).
10. Check track alignment (see page 99) and adjust as necessary.
11. Tighten the l ocknuts (A).
12. Tighten the idler shaft bolts (D) and torque to 35 ft. lbs. (47.5 Nm).
To Next Page
Loading...
