2
1
H
M
LL
48
THE PERFECT FIT
IQ Rear Suspension Adjustments
Weigh t Tran sfer During Acceleration
The preferred method for controlling
weight transfer during acceleration is
by adjusting the rear rear scissor stop
(RRSS). The factory setting (1) is the
best for most trail riding conditions.
To decrease weight transfer under
acceleration (for improved cornering),
rotate the RRSS to a higher position with
the scissor stop tool (2) located in your
tool kit.
H = High
L = Low
M = Medium
To increase weight transfer or ski lift during
acceleration, rotate the RRSS to a lower
position.
NOTE: Your dealer can help you with initial
setup and additional setup
instructions to help you achieve
your optimum ride.
To Next Page
Loading...
