54
OPERATION
Pre-Ride Checklist
Failure to inspect and verify that the ATV is in safe operating condition
before operating increases the risk of an accident. Always inspect the
ATV before each use to make sure it's in safe operating condition.
Item Remarks Page
Brake system/lever travel Ensure proper operation 27
101
Brake fluid Ensure proper level 28
Auxiliary brake Ensure proper operation 30
Front suspension Inspect, lubricate if necessary 88
Rear suspension Inspect, lubricate if necessary 88
Steering Ensure free operation -
Tires Inspect condition and pressure 104
Wheels/fasteners Inspect, ensure fastener tightness 104
106
Frame nuts, bolts, fasteners Inspect, ensure tightness -
Fuel and oil Ensure proper levels 31
89
Coolant level Ensure proper level 99
100
Coolant hoses Inspect for leaks -
Throttle Ensure proper operation 26
122
Indicator lights/switches Ensure operation 24
Engine stop switch Ensure proper operation 25
Air filter, pre-filter Inspect, clean 107
Headlamp Check operation 24
109
Brake light/tail lamp Check operation 113
Riding gear Wear approved helmet, goggles, and
protective clothing
8
ADC Fluid Ensure proper level 94
To Next Page
Loading...
Need help?
General
