EasyManua.ls Logo

Polaris 2016 RZR XP Turbo - Periodic Maintenance Chart Details (Continued)

Polaris 2016 RZR XP Turbo
150 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
81
MAINTENANCE
Periodic Maintenance Chart
Perform these procedures more often for vehicles subjected to severe use.
D Have an authorized POLARIS dealer or other qualified person perform these services.
Item Maintenance Interval
(whichever comes first)
Remarks
Hours Calendar Miles
(Km)
D
Brake pad wear 10 H Monthly 100 (160) Inspect periodically
Fuel System 25 H Monthly - Inspect; cycle key to
pressurize fuel pump;
check lines and fittings for
leaks and abrasion
Engine oil change
(break-in)
25 H 1 M - Perform a break-in oil and
filter change
Front gearcase
(demand drive) fluid
25 H 1 M - Perform a break-in oil level
check
Transmission (main
gearcase) oil
25 H 1 M - Perform a break-in oil level
check
D Drive clutch bolt
re-torque
25 H 1 M - See your dealer or other
qualified person to have
bolt re-torqued to 96 ft-lbs
(130 Nm)
Battery 25 H Monthly 250 (400) Check terminals; clean;
test
Engine breather filter
(if equipped)
25 H Monthly 150 (250) Inspect; replace if
necessary
Air filter 25 H - 500 (800) Inspect; replace if soiled
General lubrication 50 H 3 M 500 (800) Lubricate all fittings, pivots,
cables, etc.
D Throttle pedal 50 H 6 M 500 (800) Inspect for free movement;
replace pedal as needed
Throttle body air intake
ducts/flange
50 H 6 M 300 (500) Inspect duct for proper
sealing/air leaks
Shift Linkage 50 H 6 M 500 (800) Inspect, adjust
Front Suspension 50 H 6 M 500 (800) Lubricate
Rear Suspension 50 H 6 M 500 (800) Lubricate
Cooling system
(if applicable)
50 H 6 M 500 (800) Inspect coolant strength
seasonally; pressure test
system yearly
Drive belt 50 H 6 M 500 (800) Inspect; replace as needed
D Clutches (drive and
driven)
50 H 6 M 500 (800) Inspect; clean; replace
worn parts
Engine oil change 50 H 6 M 1000
(1600)
Change the oil and filter
Oil lines, hoses and
fasteners
50 H 6 M 1000
(1600)
Inspect for leaks and loose
fittings; replace if
necessary

Table of Contents

Related product manuals