Polaris 4500 HD - Install Winch Assembly; Install Fairlead Assembly

Instr 9929139 Rev 01 2018-08 Page 4 of 13
4. INSTALL WINCH ASSEMBLY.
a. Slide winch mounting bracket
u
into position
from the passenger side as shown. Orient and
align winch mounting bracket to front
suspension bracket and steering bracket as
shown. Secure into position with provided
carriage bolts
f
and locking nuts
l
. Torque
fasteners to below specification.
TORQUE
30 ft. lbs. (40.7 Nm)
b. Slide and position winch assembly
e
onto the
winch mounting bracket as shown. Ensure
mounting holes on winch assembly and
mounting brackets are aligned. Use provided
fasteners
h
to secure winch assembly onto
winch mounting bracket. Torque fasteners to
below specification.
TORQUE
16 ft. lbs. (21.7 Nm)
5. INSTALL FAIRLEAD ASSEMBLY.
a. Install fairlead
t
to fairlead mounting bracket
r
using the provided screws
f
and locking
nuts
l
.
TORQUE
16 ft. lbs. (21.7 Nm)
b. Install fairlead mount bracket
i
with fairlead to
suspension bracket with four screws
o
and
nuts
u
as shown.
TORQUE
24 ft. lbs. (32.5 Nm)