SPEED DISPLAY AREA
The speed display area displays either vehicle speed or engine speed. Vehicle
speed is displayed in either miles per hour (MPH) or kilometers per hour (km/h).
Engine speed is displayed in revolutions per minute (RPM).
1. To change which item displays, first make sure the information display area
is set to display either engine speed or vehicle speed.
2. Press and release the center button.
INFORMATION DISPLAY AREA
This area displays either engine speed or vehicle speed (whichever is not
displayed in the speed display), maximum vehicle speed, and speed or RPM. To
change the display, press and release the MODE button or the MODE switch
until the desired item is displayed.
ODOMETER/ENGINE HOUR DISPLAY AREA
This area displays the odometer, Trip 1 meter, Trip 2 meter, CLOCK, and Engine
Hours meter.
The odometer displays the total distance traveled by the vehicle since
manufacture. Each trip meter records the distance traveled by the vehicle on a
trip if the meter is reset before each trip. The CLOCK displays the time, and the
engine hour meter displays the total hours the engine has been in operation
since manufacture.
To change the display, press and release the SET button or SET switch until the
desired item is displayed.
To reset a trip meter, press and hold the SET button or SET switch until the
meter resets to zero.
32
GAUGE
Downloaded from ManualsNet.com search engine
To Next Page
Loading...
Need help?
General
