TRACK LUBRICATION
The slide rail needs snow for lubrication. Excessive wear indicates insufficient
lubrication. A new rail slide can cause faster heat build-up in limited lubrication,
resulting in excessive wear.
WARNING
Operating with insufficient lubrication between the rail slide and track guide
clips can cause track failure, loss of vehicle control and loss of braking ability,
which can result in serious injury or death. Avoid operating for extended
periods on ice and other surfaces that have little or no snow for lubrication.
If excessive rail slide wear occurs due to poor snow conditions, additional wheel
kits are available. Your dealer can provide more information.
Track damage or failure caused by operation on ice or under other poor
lubrication conditions will void the track warranty.
TRACK TENSION
WARNING
Moving parts can cut and crush body parts. When performing the checks and
adjustments recommended on the following pages, stay clear of all moving
parts. Never perform track measurement or adjustments with the engine
running.
Track adjustment is critical for proper handling. Always maintain correct tension
and alignment.
TRACK TENSION DATA CHART
Suspension Weight Measurement
Location
Slack
Measurement
144 10 lbs. (4.54 kg) 16 in. (40 cm)
ahead of rear
idler shaft
7/8-1 1/8 in. (2.2-
2.9 cm)
155 10 lbs. (4.54 kg) 16 in. (40 cm)
ahead of rear
idler shaft
3/8-1/2 in. (1.0-
1.3 cm)
93
MAINTENANCE
Downloaded from ManualsNet.com search engine
To Next Page
Loading...
Need help?
General
