What to do if my Polaris 550 INDY LXT front end pushes?
If the front end of your Polaris Offroad Vehicle pushes: * Check for worn skags. * Check for binding front suspension shafts and steering components, grease all pivot points (elevate front of machine). * Increase IFS preload (if equipped).
What to do if my Polaris 550 INDY LXT Offroad Vehicle is hard to steer?
If steering feels heavy on your Polaris Offroad Vehicle: * Make sure spindles and all steering components turn freely. * Check skags and skis for damage.
Why doesn't my Polaris 550 INDY LXT engine turn?
If your Polaris Offroad Vehicle engine doesn't turn, it could be due to: * Seized engine: See your dealer. Seizure is a result of poor lubrication, inadequate fuel supply, broken parts, or improper cooling. * Hydrostatic lock: Fuel may have entered the crankcase while the vehicle was standing or being transported. See your dealer to correct the cause. Drain plug(s) are located on the lower crankcase for emergency draining.
What to do if my Polaris 550 INDY LXT engine turns but fails to start?
If your Polaris Offroad Vehicle engine turns but doesn't start, here's what you can check: * Ensure the fuel valve is on. * Use the choke. * Make sure the tank contains fuel. * If there's a chance of ice in the fuel line, filter, or pump, add isopropyl alcohol to the fuel system. Also, install new spark plug(s). If the engine still fails to start, check for spark. If there's no spark, see your dealer. If the engine is flooded, hold the throttle open and crank the engine several times (it may be necessary to change the plug(s)). If there is poor engine compression, this indicates a major engine problem that must be repaired.
Why does my Polaris Offroad Vehicle dart from side to side?
If your Polaris Offroad Vehicle darts from side to side, check the following: * Check ski alignment. * Make sure spindles and all steering components turn freely. * Check for excessive play in the steering assembly (see your dealer). * Ensure skags are straight on skis. * Check rail slide and replace if worn.
What causes a Polaris 550 INDY LXT Offroad Vehicle drive belt to turn over?
A Polaris Offroad Vehicle drive belt may turn over due to: * Wrong belt for application: Replace the drive belt. * Clutch alignment out of spec: See your dealer. * Engine mount broken or loose: Inspect and replace. See your dealer.
What to do if my Polaris 550 INDY LXT machine fails to move?
If your Polaris Offroad Vehicle fails to move, here are some things to check: * Clutch jammed: Check for twisted belt or broken spring. See your dealer. * Track jammed: A foreign object may be caught, or the rail slide melted to the track clips due to lack of lubrication. The track may be iced up or frozen to the ground. * Chaincase sprocket or chain jammed or broken: The chain is loose or broken, or the chain tightener is loose. See your dealer.
What causes harsh drive clutch engagement in my Polaris 550 INDY LXT?
Harsh drive clutch engagement in your Polaris Offroad Vehicle can be due to: * Drive belt worn or too narrow: Replace the drive belt. * Excessive belt/ sheave clearance: See your dealer.
Why does my Polaris Offroad Vehicle front end push?
If your Polaris Offroad Vehicle's front end pushes, consider these possibilities: * Check for worn skags. * Check for binding front suspension shafts and steering components, grease all pivot points (elevate front of machine). * Increase IFS preload (if equipped).
What causes erratic engine RPM during acceleration or load variations in my Polaris Offroad Vehicle?
Erratic engine RPM during acceleration or load variations in your Polaris Offroad Vehicle can be caused by: * Drive clutch binding: See your dealer. * Driven clutch malfunction: See your dealer.
General| Brand | Polaris |
|---|---|
| Model | 550 INDY LXT |
| Category | Offroad Vehicle |
| Language | English |
Manual usage, maintenance program, and riding safety tips for owners and drivers.
Instructions for recording snowmobile identification and key numbers for reference.
Explanation of safety symbols, signal words (DANGER, WARNING, CAUTION, NOTICE) and sign types.
Guidance on safe driving, maintenance, avoiding modifications, and riding position.
Rider capacity and detailed safety instructions for operating with a passenger.
Awareness of obstacles, speed, weather, and responsible driving practices.
Information and warnings on safety labels placed on the snowmobile.
Diagram identifying key external parts of the snowmobile.
Diagram identifying controls on the handlebar, including switches and levers.
Overview of the instrument cluster, indicator lamps, and rider information center.
Instructions for adjusting headlights and passenger grab handles.
Guidance on adjusting front and rear suspension for optimal riding comfort and performance.
Details on traction products and handlebar adjustments for better control.
Comprehensive checklists and procedures for inspecting the snowmobile before operation.
Step-by-step guide for starting the snowmobile engine, including choke usage.
Procedures for engine break-in, fuel handling, and oil level maintenance.
Instructions for using electronic reverse and safe towing practices.
Schedule for regular maintenance and service checks, and owner responsibilities.
Details on brake, track, clutch, spark plug, and fluid maintenance.
Technical details, capacities, dimensions, and tuning charts for the snowmobile.
Charts for carburetor jetting and clutching based on altitude and temperature.
Diagnosing and solving common engine problems, causes, and solutions.
Solutions for rear suspension, steering, and drive belt related problems.
How to obtain warranty service and what information to provide to your dealer.
Overview of the limited warranty, its coverage, exclusions, and registration.
Details on the EPA emissions warranty, coverage, and owner responsibilities.
To Next Page