What causes the front end to push on Polaris Snowmobiles?
If the front end of your Polaris Snowmobiles pushes, check for worn skags. Also, check for binding front suspension shafts and steering components, grease all pivot points (elevate front of machine) and set static sag.
Why does the rear of my Polaris 550 Shift 136 Snowmobiles ride too stiff?
If the rear of your Polaris Snowmobiles rides too stiff, check for binding suspension shafts and grease all pivot points. Also, adjust torsion spring preload to achieve proper static sag, check track tension and rotate RRSS to lower position.
Why does my Polaris 550 Shift 136 dart from side to side?
If your Polaris Snowmobiles darts from side to side, check the ski alignment. Make sure spindles and all steering components turn freely. Ensure skags are straight on skis, set static sag and check rail slide/replace if worn.
How to prevent the rear suspension of Polaris Snowmobiles from bottoming too easily?
To prevent the rear suspension of your Polaris Snowmobiles from bottoming out too easily, adjust the torsion spring preload to achieve proper static sag. Rotate RRSS to higher position.
Why does my Polaris Snowmobiles engine stutter in reverse?
If your Polaris Snowmobiles engine stutters in reverse, it's likely that the misfire mode has activated to prevent engine overheat. Shift to forward or restart the engine to clear the misfire mode.
General| Engine Type | 4-Stroke |
|---|---|
| Engine Displacement | 544 cc |
| Cylinders | 2 |
| Track Length | 136 inches |
| Track Width | 15 inches |
| Brake Type | Hydraulic Disc |
| Seating Capacity | 1 |
| Front Suspension | Independent |
| Rear Suspension | RydeFX MPV Shocks |
| Fuel System | EFI |
To Next Page